Solvent-free epoxy coating
CRF Solvent-free epoxy coating DATA SHEET.
CRF SOLVENT FREE EPOXY COATING
TECHNICAL DATA SHEET
USES - CRF Solvent Free Coating is suitable for use where a hard wearing, dust free, hygienic and easy to clean floor topping is required. It is very widely used on industrial or commercial floors in laboratories, showrooms, schools, plant rooms and the food industry.
DESCRIPTION - CRF Solvent Free Coating is based on a blend of Epoxy Resin and Curing Agent binder, giving a very low odour. The product is supplied as two components, the Epoxy Resin component being pigmented. CRF Solvent Free Coating has been formulated using fillers and giving high abrasion resistance properties.
ADVANTAGES
1. Solvent Free - giving a low odour system suitable for use in food industries. 2. Hygienic - provides easy to clean, dust free surfaces. 3. Good Chemical resistance. 4. Choice of colour range. 5. Hard wearing, good abrasion resistance withstands foot and light vehicular traffic.
TECHNICAL DATA
Usable time (1.0kg mix) at 20°C - 40 minutes Minimum application temperature - 5°C Initial cure (foot traffic) - 24 hours Full Cure (chemical resistance, Mechanical properties) - 7 days Shelf life - 12 months Storage temperature - 5°C – 35°C. Mixed S.G. @ 20°C _ 1.20 – 1.25 (Resin & Curing Agent mixed together)
CHEMICAL RESISTANCE
COLOUR RANGE
1. WHITE-------------------------------------------------------------------------------------- 00-E-55
2. VERY LIGHT GREY ------------------------------------------------------------------- 00-A-01
3. LIGHT GREY----------------------------------------------------------------------------- 00-A-05
4. MID GREY --------------------------------------------------------------------------------- 00-A-09
5. BLUE GREY------------------------------------------------------------------------------ 18-B-21
6. DARK GREY----------------------------------------------------------------------------- 18-B-25
7. BRICK RED-------------------------------------(nearest BS No 04C39 or RAL 3011)
8. CHERRY RED- --------------------------------------------------------------------------04-D-45
9. BUFF------- -------------------------------------------------------------------------------- 08-C-35
10. YELLOW-- -------------------------------------------------------------------------------- 08-E-51
11. BRIGHT GREEN------- ---------------------------------------------------------------- 14-E-53
12. CHROME GREEN------------------------------(see RAL Colour Chart)-RAL 6001
13. RACING GREEN----------------------------------------------------------------------- 14-C-39
14. BLUE--------------------------------------------------------------------------------------- 20-D-45
15. BRIGHT BLUE-------------------------------------------------------------------------- 18-E-53
16. BLACK------------------------------------------------------------------------------------- 00-E-53
Non – standard colours are available for an extra charge of between 5 – 10%.
SURFACE PREPARATION
New concrete should be at least 21 – 28 days old or the moisture less than 5%. The substrate should be clean, free from laitance, oil, grease or other agents, which may impair adhesion. Techniques should include one or more of the following, depending on how contaminated the substrate is: - acid etching – light mechanical scabbling – blasting – grinding or degreasing.
APPLICATION
Apply by brush or roller; re-coating should take place as soon as possible to achieve good intercoat adhesion properties, preferably on the following day. If more than one day elapses between coats, abrade the surface lightly with glass paper, before re-coating.
MIXING
Add the full contents of Curing Agent Component B to the contents of Epoxy Resin Component A and mix thoroughly until an even colour is obtained.
COVERAGE
A 5.0kg unit of CRF Solvent Free Coating will cover approximately 25m˛ per unit per coat. Please note: For porous surfaces, very light colours and pastel shades may require extra coats.
CLEANING
CRF Tool Cleaning Solvent should be used – do not use on hands.
HEALTH & SAFETY
It is recommended that barrier creams, gloves and protective clothing be used when using CRF Solvent Free Coating, CRF Primer and CRF Tool Cleaning Solvent.
If eyes are affected wash with copious amounts of cold water and seek medical advice. For hands, wash with soap and water. For full details see separate Health & Safety Data Sheet.
OTHER INFORMATION
All CRF Epoxy Systems products’ are manufactured to a high standard of quality. Whilst we aim to ensure that any advice, information or recommendations given are reliable and correct the Company cannot accept any liability, directly or indirectly, arising from the use of its products, as we have no direct or continuous control over where or how its products are applied. No undertaking can be given against infringement of any patented processes.
82 Mallard Crescent Poynton Cheshire SK12 1HT
Tel: +44(0) 1625 879508 Fax: +44(0) 7006017725 Email: info@cheshireresinflooring.co.uk